Union Tool Corporation

The Union Tool Corporation
P.O. Box 935 • Warsaw, IN 46581
Phone: (574) 267-3211 • Fax: (574) 267-5703

Shipping Address: 1144 N. Detroit St. • Warsaw, IN 46580

Industry: RV's

Recreational Vehicle (RV), Mobile Home, Fifth-Wheel Towables Manufacturing.

Making wall, ceiling and floor panels with lower labor costs and less waste is putting a bit of profit back in the bottom line for builders of recreational vehicles, mobile homes, fifth-wheel towables and manufactured housing. Here are some of the machines that have made this possible:

Dual heat hot melt roller coaters.

110-inch DUAL HEAD HOT MELT ROLLER COATER - A really big hot melt roller coater for the lamination of wall panels, ceiling panels and floor panels in the recreational vehicle (RV), mobile home, and fifth-wheel towables industries. Coats one side or both sides of the substrate in a single pass; single or double sided coating modes selectable with the flip of a switch. Combined with the 110" Rotary Laminator (below), this makes a complete laminating station for very large panels.

110-inch rotary laminator from Union Tool.

110-inch ROTARY LAMINATOR - A really big rotary laminator for wall panels, ceiling panels and floor panels in the recreational vehicle (RV), mobile home, and fifth-wheel towables industries. Provides laminating pressure for panel sandwiches of substrate cores and facing sheets. Combined with the 110" Dual Head Hot Melt Roller Coater (above), this makes a complete laminating station for very large panels.

Sheet foam feeder.

SHEET FOAM FEEDER - The programmable Union Tool Sheet Foam Feeder simplifies and automates the process of de-stacking foam sheets and feeding them one at a time to a conveyor. Handles foam sheets 4 feet wide and up to 16 feet long, as line feed speeds up to 100 feed per minute.

EPS foam scrap disposal machine.

EPS FOAM SCRAP DISPOSAL MACHINE - EPS foam scrap disposal made easy! RV, mobile home and manufactured housing makers use lots of EPS foam sheets and panels, and trimming, routing and grooving operations produce large volumes of EPS foam beads and bits that create disposal problems. Just dump the EPS bead scrap into this machine, and out come uniform sheets that stack neatly in minimum space, saving plant space and disposal costs. It's Union Tool's engineering expertise with heated rollers and roll technology that does the trick!

Hot melt roller coater machine.

HOT MELT ROLLER COATER, Series #15, Model A - Hot Melt Roller Coater designed to apply hot melt coatings such as wax, contact adhesive, PUR adhesive, pressure sensitive adhesive or virtually any coating material that requires heat for roller coater application.

Hot roll laminator.

HOT ROLL LAMINATOR - Union Tool hot roll film laminators speed production line application of protective films to one or both sides of EPS foam cores. The programmable controller assures tight tolerances for both roll temperature and line speed. Processes foam cores up to 4' wide by 12' long.

Automatic vacuum sheet feeder.

AUTOMATIC VACUUM SHEET FEEDER - This automated vacuum sheet feeder accepts a stack of wood, plastic or metal sheets and feeds them one at a time to a conveyor line or a processing machine. The infeed stack is automatically indexed up to the correct pass line height as each sheet is fed.

Rotary laminator for wall panels.

ROTARY LAMINATOR for wall panels - A heavy-duty rotary laminator to laminate panels to wall stuctures or frames to lay up complete wall sections.

Rotary pinch roll laminator.

ROTARY PINCH ROLL LAMINATOR for substrate lamination - A pinch roll rotary laminator to exert bonding pressure to laminate two substrates or web materials together. Accepts material up to 50" wide (Union Tool laminators are available up to 62" wide.)