Union Tool Corporation

The Union Tool Corporation
P.O. Box 935 • Warsaw, IN 46581
Phone: (574) 267-3211 • Fax: (574) 267-5703

Shipping Address: 1144 N. Detroit St. • Warsaw, IN 46580


110-inch Rotary Laminator

Rotary Laminator for Floor, Ceiling and Wall Panels - Union Tool 4564

A really big rotary laminator for wall panels, ceiling panels and floor panels in the recreational vehicle (RV), mobile home, and fifth-wheel towables industries. Provides laminating pressure for panel sandwiches of substrate cores and facing sheets. Combined with the 110" Dual Head Hot Melt Roller Coater, this makes a complete laminating station for very large panels.


Depending on your industry, you may refer to this machine as a rotary laminator, a panel laminator, pinch roll (or pinch roller) laminator, or laminating roller panel press.

Operational Description

This rotary laminator (pinch roll machine) was built to provide laminating pressure between several substrates in the construction of walls and floors for the RV industry.

The machine incorporates two 12" diameter rubber-covered laminating rolls. The upper roll is adjustable from 0 to 6". The rolls are powered by an AC variable-speed motor, providing a speed range of 20 to 100 feet per minute. Two 6" diameter air cylinders provide the laminating pressure, which can be varied by the air pressure adjustment of the regulator located on the machine.

The machine was designed to laminate walls, floors and ceilings for the recreational vehicle (RV) industry.